ev|Service Manager - 04.2014 - Release Notes


New Global Search

Important warning

The new global search will be deployed progressively over several weeks. Customer accounts will not immediately have this feature active.

General principles

The search engine now supports search in several tables at the same time. The search is available from the left hand side menu.

Easyvista 2014_MARCH_EN_html_ac0f087.png

Figure 1 – New search mode

This interface is simplified and only displays one field. The previous interface is available via the advanced mode by clicking on the « Advanced » link.

Easyvista 2014_MARCH_EN_html_me6e1573.png

Figure 2 – Advanced search mode

In the new mode, search results are displayed as follows:

Easyvista 2014_MARCH_EN_html_m40183be8.png

Figure 3 – Search results

The result displays data from several tables and several fields from these tables. In this example, EasyVista searches results in employee, incidents, service requests and equipment tables.

Every list is identified by its icon (1). Wizards available in list are displayed (2).

When displaying employees, the quick call is also available (3). This new system can optionally replace the previous quick call.

Note: Data displayed depend on customization AND the current profile of the connected user.

Customization

Definitions

The customization studio is based on vocabulary:

DefinitionObject on which the search is performed. For example: Employees, Incidents, etc. To guarantee performances, no more than 7 definitions can be displayed.
ModelGroup of definitions. Global customization.
InterfaceFor a given object, the query used in the search. Several interfaces can be defined for a single object, but only one is used. See below for more details.

Customization

Global search customization is in the Administration/Parameters/Global search studio menu.

Easyvista 2014_MARCH_EN_html_m36f42f54.png

Figure 4 – Global Search Studio menu

Easyvista 2014_MARCH_EN_html_m465d1238.png

Figure 5 – Global Search Studio screen

Easyvista 2014_MARCH_EN_html_m39017d73.png

Figure 6 – Object tab

In the object tab, you can change the label for an object and remove that object. The employee object can’t be deleted.

Easyvista 2014_MARCH_EN_html_2f19bc85.png

Figure 7 – Details for an object

1

Interfaces are displayed here. An interface is a grid attached to a menu on which the search will be conducted. Several interfaces can be attached to an object but the system will only search in one of them, according to the following rules:

  1. If an interface is in the current menu, it will be used. For example, in the illustration above, if the current menu is My Department, this menu will be used.
  2. If the no interface is in the current menu, the system will go through the available interfaces and search for the first available in the user’s profile.

So it is important to create interfaces in the correct order.

If no interface is available, no search will be done on said object.

2Menu to select current interface. The red « - » deletes the interface. The “Employee” interface can’t be deleted. =.
3Grid selected with report and filter. This grid will be used to display results if at least one record is returned by the search.
4« Add new interface » button
5Fields on which the search will be performed. Fields and tables used have to be displayed in each interface.
6Table used for search. The red « - » button is here to delete a table.
7Field used for search. The red « - » button is here to delete a field.
8« Add new field » button
9« Add new table » button

Limitations

To guarantee performances only 7 definitions and 10 search fields per definition are allowed.

Important: When activating global search after a migration, verify the consistency of the filters and views in place. The default views and filters are based on the unique identifier of the “List” views and “None” filter. These can be altered via customization and may not be the most relevant ones.

Impact on Quick Call

The new system can replace the Quick Call as a Quick Call icon displayed next to the user name.

Easyvista 2014_MARCH_EN_html_m550f42db.png

Figure 8 - New Quick Call

Easyvista 2014_MARCH_EN_html_m1907596.png

Figure 9 – Grid displayed after using the button

The display of the previous Quick Call is available optionally by using a new parameter «{SM} Hide Back Office Quick Call input field».

Easyvista 2014_MARCH_EN_html_4351f323.png

Figure 10 - Quick Call display

Important note: The display of the Quick Call may not be active even if the parameter is at False. If it’s the case, change the value to True, then False again.

Centralized Item creation

Easyvista 2014_MARCH_EN_html_60844536.png

Figure 11 – New Panel

A new panel has been added on the screen to simplify the item creation. Items displayed are based on the connected user’s profile.

Left panel display option

Small triangles next to the title of a panel can show/hide the content of the panel:

Easyvista 2014_MARCH_EN_html_m3079f08.png

Figure 12 – Show/hide panel content

Note: Display of panel state is not saved from one session to another.

MS-Project import

Principles

It is now possible to import Microsoft Project projects into EasyVista when creating a project. The project has to be generated as an XML file beforehand by using the Microsoft Project Save as XML menu.

Easyvista 2014_MARCH_EN_html_m2e5031d8.png

Figure 13 - MS-Project 2013 Example

Step 1: Save project as XML

Easyvista 2014_MARCH_EN_html_m1073ea33.png

Figure 14 – Save project as XML

From EasyVista, create a new project and select the Imported from MS Project option.

Easyvista 2014_MARCH_EN_html_m1509af44.png

Figure 15 – New Project screen

Upload the XML file.

Easyvista 2014_MARCH_EN_html_6887a6f7.png

Figure 16 – Select XML file

Important: When importing a project, you can choose to create the resources allocated to a project if they don’t exist as employees in the employee table. The name of the employee is used as a reference. The users that are created this way will have no profile, login and password and an admin will have to give them the credentials to connect and update the project.

Once the file is uploaded, a preview window is displayed

Easyvista 2014_MARCH_EN_html_m4c6943f7.png

Figure 17 – Project Preview

The final project creation window is then displayed.

Easyvista 2014_MARCH_EN_html_5b4b6bd0.png

Figure 18 – Final project creation

Below, the EasyVista Gantt chart of the project displayed previously.

Easyvista 2014_MARCH_EN_html_39d10189.png

Figure 19 – Gantt chart of an imported project

Import limitations

There are some differences between EasyVista projects and MS projects:

With MS Project, several resources are affected to a task. EasyVista will create a global task and several sub tasks, one for every person allocated to the task.

Hours on tasks are removed, as EasyVista only manages complete days and not hours.

Tags:
Last modified by Unknown User on 2017/04/25 10:01
Created by Administrator XWiki on 2014/04/28 16:34

Shortcuts

Recent Updates

Haven't been here in a while? Here's what changed recently:

-   Product name - ev itsm.png
-   Product name - ev sas.png

Interesting Content

How to Automate Integration
Add a Shortcut to an App
History
Quick Dashboard
Full text search - Stop Words

Powered by XWiki ©, EasyVista 2018