EV Observe - Configure SNMP on Alcatel Switch Monitoring Prerequisites
Last modified on 2023/05/22 16:16
To monitor Alcatel switches based on the SNMP protocol, specific prerequisites must first be met.
Procedure: How to configure SNMP for an Alcatel switch
Step 1: Configure the switch
1. Log in to the host to be monitored with the SSH or Telnet protocol.
2. Run the commands below.
- Replace <ip_box> with the values of your environment.
IP service SNMP
user snmpuser password supervision read-only all no auth
aaa authentication snmp "local"
snmp security no security
snmp community map "public" user "snmpuser" on
snmp station <ip_box> "snmpuser" v2 enable
example snmp station 192.168.1.1 "snmpuser" v2 enable
Step 2: Check that SNMP works correctly on the switch
1. Run the command below.
write memory
copy working certified